• Mann Lake Ltd.

Thanks to these sponsors, you can enjoy this website without annoying popup ads!
You can show your appreciation by clicking on their banners above to go directly to their websites.

Print Friendly, PDF & Email

First year beekeeping

Updated 8 Jan 2023.  I continually update this page, so please refer to the current version.  For mite treatment options, search “Varroa Mite Management”

Beekeeping in a Nutshell

I’ve attempted to distill 50 year’s of beekeeping experience into a short set of instructions for starting out with bees in the Sierra Foothills.  This page provides some quick step-by-step notes for your first year of beekeeping, written specifically for those starting with a nucleus hive or package bees purchased from me, but is generally applicable.

Bottom line:  Once you get a colony started, other than adding space, the two most important things to pay attention to are varroa management and colony nutrition.  If you do this, most other problems go away.

Below is a brief visual of  hive management responsibilities in the Northern California Foothills.  If you live somewhere else, the timing of the honey flow and length of winter may differ.  I’ve written a step-by-step plan for colony management further down on this page.

Starting Out

First, educate yourself!  A honey bee colony is a living animal that deserves to be cared for properly.  You are beginning beekeeping at a time in which honey bees are struggling to stay alive–beekeeping is more difficult than it was prior to the parasitic varroa mite (which invaded around 1990).  Although honey bees are essentially wild animals living in a box provided by their “keeper,” bees are in the midst of an evolutionary struggle due to the introduction of  varroa  (which completely changed colony stress and virus dynamics).  In addition, the bee population now faces the additional novel stressors of  persistent European foulbrood, loss of forage in many areas, the effects of climate change (shorter winters), increasing CO2 (which decreases the nutritional value of pollen), and perhaps pesticide exposure (this fear is greatly exaggerated as far as most areas are concerned, but may occur in areas with intensive commercial agriculture).

Other than varroa, however, basic beekeeping practices were well figured out long ago, and I highly recommend two classic USDA publications for best management practices.  Be aware that both of these publications were for the North, and would need to be adjusted considerably for the West and southerly areas, but the main principles still apply.  Farrar’s Productive Management of Honey Bee Colonies is a great read for understanding the winter cluster and swarm prevention; Beekeeping in the United States covers all regions, and has a great section by Moeller entitled Managing Colonies for High Honey Yields.  I’ve linked these articles at Reading Materials.

It is more difficult to keep healthy bees than it is to care for most common pets (for which you generally need only to provide food).  The more you understand the biology of colony health and dynamics, the more successful you can be at beekeeping.   Bees see and respond to the world (environmental cues) very differently than do humans.  In order to be a better beekeeper, I suggest that you try to learn to see the world through the eyes (and antennae) of the bee, and to “think” as does the honey bee superorganism.

What is your motivation?

Please allow me to be frank.  If your motivation is to “save the bees,” please realize that the honey bee is in absolutely no danger of extinction.  Caring for a hive of bees requires several hours of husbandry a year, involving opening and inspecting the frames inside, and getting stung.  Keeping your bees alive and healthy these days requires management for the varroa mite–most beginners fail at this, and their colonies die an ugly death.

The number one feedback that I get from first-year beekeepers is that they did not realize how important it was to monitor and control  varroa  in their hive — most beginners lose their first hive to the mite.

So if your motivation is to help the bees, unless you’re willing to provide a hive with good husbandry, you’d do more service to bees, other pollinators, and the environment by planting flowers and flowering shrubs and trees, supporting small farmers, buying local produce, minimizing your carbon footprint, and telling your representatives to support the EPA.

On the other hand, the keeping of honey bees offers one a “tangible connection to the wild.”  If you’re willing to make the effort, the honey bee can help to connect you to Nature, and to the joy of experiencing how this fascinating social insect manages to eke out a living.

“Treatment-Free” beekeeping

I kept bees “treatment-free” for two decades prior to the arrival of varroa, and my goal is to be able to do so again in my lifetime.  Towards that end, I am a huge proponent for breeding bees for the traits involved in natural resistance to varroa, and am seriously involved in my own breeding program.  That said, most lines of honey bees today will succumb to the varroa/virus complex within a year or two of starting the hive, unless realistic measures are taken by the beekeeper to reduce the mite population.  Please read my article “The Varroa Problem Part 6b–Small-Scale Breeding,” in which I discuss some of the misconceptions often advocated by well-intentioned (but biologically misinformed) “treatment-free” promoters.

If you have an isolated apiary, or are fortunate enough to get a queen with the right genetics, your colony may survive without treatment.  Sadly, this generally does not happen, and most beginning beekeepers lose their colonies to varroa.  This is completely avoidable, and can be prevented by regular monitoring of your hive for its degree of varroa infestation with alcohol washes (my preferred method) or a well-done sugar shake.  If thus indictated, there are a number of safe and effective (and organically-approved) products that can be used to reduce the mite population (detailed further down).

We love our bees, and hate to send our beautiful nucs off to certain death due to beekeeper negligence.  Please, monitor your colonies for their varroa level from late June on, and help them to survive!  Please be a responsible beekeeper–colonies that are allowed to die from varroa hurt the surrounding beekeeping community.  


There are several good beginners books.

First Lessons in Beekeeping, Dadant.  Standard beginner reference.

The Beekeeper’s Handbook by Diana Sammataro & Alfonse Avitabile.  Many recommend this one.

Storey’s Guide to Beekeeping.  Easy reading style, straightforward information.

Beekeeping for Dummies.  I haven’t yet read, but several beginners have recommended.

Honey Bee Hobbyist by Norm Gary—good overall understanding, rather than how-to.

Homegrown Honey Bees by Alethea Morrison.  A fun journal of the experiences of a first-year beekeeper.  The author ran it by me for accuracy prior to publication, so good info.

A Book of Bees, Sue Hubble–beautiful prose about being a beekeeper

And of course, ScientificBeekeeping.com.  Although I have yet to summarize my many articles into a book, I suggest that you familiarize yourself with bees, starting with how the colony manages its labor pool, feeds itself, varroa management, The Rules of Beekeeping, and for a deeper understanding of the biology of the hive over the course of the year, my Colony Buildup and Decline series.

Find a Mentor

Beekeeping is difficult to learn from a book, and the proper handling of bees to avoid excess stinging even more difficult.  The best thing to do is to get over the innate human fear of bees and of being stung.  Bees sting.  You want to keep bees.  You’re gonna get stung, so get used to it!  Experienced beekeepers generally feel that a regular dose of bee venom improves their health and well being.


I strongly suggest that you find a mentor who can demonstrate handling technique.  Find a mentor who does not normally wear gloves or much protective gear.  You want to learn to approach your bees in a cooperative mindset, rather than an adversarial approach.  If you learn while fully protected with gloves, you will get bad habits, as it prevents the bees from giving you “reminders” that your technique is sloppy or disrespectful to the hive.

Hive inspection on sunny days should involve minimal stingings, but I’d shoot for several dozen stings a season in order to avoid sensitizing yourself to bee venom (beekeepers who receive only a few stings a season set themselves up for true bee sting allergy late on).  Learn to use smoke gently but appropriately.  Move as though you are practicing Tai Chi–no sudden movements.  The point is to avoid going past the bees’ threat response threshold.  At that point they will start giving you “warning bumps” or stings.  Learn to recognize those warnings.


You’ll need a veil  — defensive bees aim for the top of the intruder.  The most painful places to be stung are all above your shoulders.  Learn to work bees barehanded, but wear a veil until you no longer react to bee stings.

Image is important — the well-attired beekeeper  looks sharp!  Bow tie is optional.

Drawing from the book Beekeeping, by E.F. Phillips 1921.






















I suggest a lightweight hooded jacket (we haven’t tested them all, but like the (widely-available) Eco-keeper hooded bee jacket (shown below).  FWIW, I have no interested in promoting any products, but am happy to tell you which products we use in our own beekeeping business of 2000 hives.

Eco-Keeper Professional-Grade Bee Keeping Suit, Jacket - Sheriff Style Hood Bee Jacket (Hooded Jacket)

A smoker — As far as smokers, I personally prefer dome-top rather than cone-top (funnel-shaped) smokers, in the 4″ x 7″ size (4 x 10 is too large and awkward).  Dome top smokers better direct the smoke and don’t burn through the fuel as rapidly as do cone top).  I like a stainless steel smoker, with a protective basket around it, with a square non-plastic bellows  that is roughly level with the bottom of the smoker, so that it doesn’t tend to tip over (similar to that shown below).

Note: I do not recommend the stainless smokers with full inside insert, such as shown below–they do not work well!  You want one with the perforated bottom plate with three legs.  Check  for  what  kind  of insert is inside before ordering!

The hive tool  — the smoker and hive tool are the only tools that I generally carry (plus a cigarette lighter to light the smoker).  I prefer the curved-end hive tools as shown (rather than flat hook-end tools)–you can do everything with them.

I  greatly prefer tools with a 1/2″ offset rather than the more common 3/4″ curve, and I keep that edge sharp for scraping off propolis. I hold my hive tool to use the curved end for prying apart frames, since it gives you more leverage and control.  I especially like the Jero brand 7-1/2″ hive tool for summer work when you don’t need a lot of leverage to break the propolis; I use a 10″ tool when it’s cooler.    Caution–Jero’s come really sharp, so first rub the flat end against a rock; leave the curved end sharp.

Gloves —  best to learn without them, but I recommend vinyl (details below) or goatskin.  Use Vaseline to keep leather gloves flexible–it’s better than any fancy treatment on the market, and doesn’t add odor.

You will be a far better beekeeper as soon as you learn to work without gloves, but I suggest that you learn to do so by working small colonies under perfect conditions.  Under other circumstances try using 5 mil white nitrile, long-cuff gloves.


I’ve been happy with the two brands above.  Each feels a bit different, but I can’t say that I prefer one over the other.  These gloves prevent most stings, are long enough to tuck under the cuff of your jacket (I recommend a hooded jacket), and are remarkably durable (I’ve gotten 4 full days of hard work out of some pairs).


We really like these gloves when we are working bees in cold or rainy weather (we rarely wear gloves during warm weather).  I put on a glove during warm weather for the photo above–yes, they get a bit sweaty, but your dexterity is so much better than with leather gloves.  If you wish to wear leather gloves, get snug-fitting goatskin gloves.

You do not want to avoid stings–that will only predispose you to eventual bee sting allergy.  Working with gloves allows you to get into bad habits–when gloveless, the bees will patiently remind you each time you make a mistake.  If you’re getting stung, you’re doing something wrong (this does not apply so much with Africanized bees).  It may be hard for beginners to believe, but once your immune system gets used to regular stinging, your body misses it when it doesn’t get its regular doses of bee venom.

Handling Tips:

Smoking the Hive

Forget about going “smoke free”–proper, light use of smoke is the beekeeper’s best tool.  You only need to use a little, but apply that little bit immediately  upon opening any part of the hive–timing is everything!

You only need to smoke the guard bees–bees in the middle of the cluster rarely sting–apply gentle smoke to those on the periphery.  Look at their “faces”–if they are looking at you, then they are aware of you!   A little bit of smoke goes a long way — don’t over smoke your colony — use only enough smoke to get the bees off the top bars, and so that none are looking at you.

Never reach for a frame if there are bees looking at you.  Notice the bees in the photo above that are looking at you.  They are guard bees, and since they’re looking at you, they are aware of you.  Give them a gentle puff of smoke to turn them away from you.  Only when you don’t see any faces looking at you should you reach towards a frame.   Keep an eye on the bees, and when they start to look at you again, give another gentle puff of smoke.

Make sure that your smoke comes out cool, WHITE, and DENSE.  Bees do not respond to weak or grey smoke like they do to dense white smoke.   Many beekeepers use burlap, but I dislike the smell.  Many natural materials work well–ask a local beekeeper.  My favorites are pine needles fluffed by car tires on an asphalt road after the first autumn rainstorm, punky oak wood, eucalyptus bark, oak leaves, or wood pellets (harder to light, but burn for a long time).

Working the hive

Beginners should always wear a veil!  (Thanks to beekeeper Trish Harness for this suggestion).  The most painful places to be stung are all on your head, and that’s exactly where defending bees aim!  Until you’ve build up “immunity” to stings, always wear a veil.

Approach bees with respect, but get over your fear of them as quickly as possible.  Stings are the bees’ way of telling you that you have made them think that they need to defend their colony–once you learn not to give them reason, you can make it look like magic.

In my beginners demonstrations, I get people over their initial fear by my example of wearing only shorts and a tee shirt, opening a hive,, and then shaking a tub full of bees from the comb, then ladling scoops of bees with my bare hand into their bare hands–no one ever gets stung.  After this demonstration, everyone is far more relaxed around the bees.  But I know exactly what I’m doing.

And I’ve been stung so many times that I no longer swell up or itch after a sting (OK, slight temporary swelling when stung on the lip or eyelid).  One gets used to stings to the hands and elsewhere, but the ones to the face still hurt like hell for a few minutes.  So although you will see many experienced beekeepers working without veils (because it’s so much easier to see the queen, eggs, etc.), I strongly suggest that beginners always wear a veil until they no longer swell in response to stings. And make sure that any visitors wear a veil.  Practical tip: put on your veil before you enter the apiary, and don’t remove it until you are out of sight of the hives (this is when many get stung to the face).  We really like the hooded jackets that unzip from the front  and allow us to flip the hood forward or backward.

Typical bee working for my sons and I (we’re in an almond orchard, performing alcohol washes for varroa).  Note that when it’s warm, my sons typically throw a hooded veil over their heads, unzipped from the jacket.

Move smoothly–like you’re doing Tai Chi.  Bees only sting when they feel that you are threatening their hive.  So don’t do anything threatening!  Fast or jerky movements appear threatening.  Always use smoke, but use it sparingly.  The only bees that will generally sting are the guard bees on the periphery of the cluster–especially at the entrance and at the top bars.  Bees that are not looking at you aren’t interested in you.  If you see bees looking at you, give them a little puff of smoke and wait until they turn away from you.  It is only safe to pick up a frame if there are no bees looking at you.

Bees will often fly at your hands or face and give “warning bumps” prior to actual stinging.  Pay attention to what they are telling you–BACK OFF!  They either don’t want to be disturbed at that moment, or you have not used enough smoke, or you’ve been too rough.

If there are bees looking at you, warning bumps, stinging, or the smell of alarm pheromone, STOP WHAT YOU ARE DOING!  Do not keep going, or things will quickly get worse–you don’t want to go there!  Give the bees a chance to calm down, and for alarm pheromone to dissipate.  Give the top bars a light puff or two of smoke until there are no bees facing you.  If you can’t get them to calm down, then just close the hive up for the day.

The best way to learn how to work gently with bees is to carefully watch an experienced beekeeper who doesn’t usually wear gloves (or veil).  Such a beekeeper has learned how to work bees with care and respect.  Those who always wear gloves and full gear often have very bad habits.  I strongly suggest that you learn to work bees barehanded in good weather–thin latex or nitrile gloves are a good way to eliminate most stings, but still get a “feel” for the bees.

The Rules

Q:  What “should I do?”

A:  There are no “shoulds” in beekeeping other than practicing good animal husbandry.  Bees need only a dry cavity, food (nectar, pollen, or syrup and pollen supplement if lacking from natural sources), and parasite management.  My basic rule is to not do anything unless you completely understand the reason that you are doing it!

You will find on the internet a plethora of opinions (often strongly expressed) on the “right way” to keep bees.  In general, the more emphatic the author, the less I’d trust the information. For a review of the rules according to the bees, see The Rules and The Rules Redux.


My advice–concentrate on (1) varroa management and (2) nutrition (especially in the late summer), and do so proactively–before mites or poor nutrition have seriously stressed the colony.

Getting Started

I strongly suggest that you start with two deep Langstroth brood chambers (to establish the brood chamber), and later “medium” honey supers over a queen excluder (lots of reasons).  Such equipment has truly stood the test of time (since the mid 1800’s) and is by far the easiest way to learn to keep bees.  You can try other systems (top bar, Warre, etc.) later, after you’ve experienced success with “standard” equipment.  If weight (of the boxes) is an issue for you, I suggest using 8-frame Langstroth equipment (same as above, but a narrower, lighter box), rather than using medium supers for the brood chamber.


Place your hives in a sunny location with morning sun, so that they can get an early start at foraging in the morning.  If you live in an especially hot area, they will benefit from afternoon shade.  Hives will do OK in the shade, but are much more “pissy” to work.  Place the hives in a dry area with good air drainage.  The best hive stands are two 8″x8″x16″ cinder blocks, placed flat sides down, with the hive tipped slightly forward for drainage.  Do not place more than one hive on a stand, as vibrations from working will transmit via the stand to the other hives.  If you have neighbors, place a fish pond with aquatic plants and floating wood as a water source for your bees (so that the bees won’t cause problems with your neighbors).

If you live in an area with bears, you MUST protect the hive.  Plans for an inexpensive bear fence are here.

The Plan — Step by step

A nuc or package comes with a vigorous young queen and a cluster of bees.  A nuc, due to already having brood, will grow much more quickly.  If you are a first-time beekeeper, I suggest that you request a weak nuc, so that you have more time to learn before it grows into a large and more defensive colony.

Below is an outline of your management plan.  Further down are more details.

First-year steps:


  1. Install the nuc/package into a brood chamber.  Add drawn comb if you have it, otherwise frames of foundation (wax-coated plastic foundation is by far the easiest to use).  Foundation is not necessary, but it makes beekeeping MUCH easier.  Place 10 frames total in the hive body, all always squeezed tightly together.
  2. Unless there is a strong nectar flow on, feed the colony as much 1:1 sugar syrup as they will take (at least a half gallon a day if on foundation).  This will allow the colony to produce the beeswax necessary to draw comb.  A strong nuc lacking honey stores can starve in a day — make sure that they have a comb of honey when installed, or feed at least a gallon of sugar syrup immediately.
  3. Continue feeding until all 10 combs are drawn, and the outer two combs are filled with “honey.”  Only then will you add the second brood chamber (by this time all 10 frames will typically also be covered with bees).

Rate of colony growth:  A strong nuc full of sealed brood can grow explosively!  It can fill 1o frames in less than a week.  That’s why I suggest that first-timers ask for a weak nuc — so that they can enjoy opening it up a few times a week and watching it grow.

One problem for beginners is that a new hive is much easier to manage on already “drawn” comb than if you are starting with foundation.  A strong nuc, if not fed enough syrup to draw comb, may feel “crowded” and swarm!  Feed the colony enough so that they are producing “white wax” and drawing comb continuously.

Note: it is generally not necessary to feed colonies sugar syrup.  On the other hand, bees LOVE sugar syrup, and it is one of our best management tools.  If there is no natural nectar flow occurring, the feeding of syrup will allow a colony to continue growing and drawing foundation, or to put on winter stores.  The more hives in the neighborhood, the more likely that there will be nectar dearths, since small growing colonies cannot compete against large established colonies.

Adding the second brood chamber

  1. Add the second brood chamber —  with 10 frames of foundation or drawn comb, all squeezed together.  In general, you will get straighter combs if you don’t mix frames of foundation with frames of drawn comb.
  2. At this point you can decide whether to continue feeding syrup, or if the honey flow has begun, to allow the bees to store pure honey.  If you choose the latter, you can later extract some of the honey, and then feed syrup to replace it for winter stores.

Supering for honey

  1. In general in the West, a nuc or package won’t grow larger than two deeps high in the first year.  But if it does, you can place a queen excluder over it (I like queen excluders), and then place a medium super on top for honey collection.  Tip: bees are loathe to draw foundation above a queen excluder if there is a band of honey in the combs immediately below the excluder.  If this is the case, rotate some brood combs from the lower brood chamber into the middle of the upper brood chamber, so that brood is right up against the excluder.  This will encourage the bees to pass through the excluder and draw comb.  Important note:  bees will not draw foundation until every drawn cell in the boxes below is filled with nectar!  There are no tricks to induce them to draw foundation otherwise.

June/July management

  1. Starting in June, perform alcohol wash or sugar roll to monitor the mite level.  Treat if more than 6 mites per half cup of bees.
  2. Your first-year goal is to build the colony to a double-deep brood chamber, with the upper box mostly filled with honey to provide winter stores.

August management

  1. Control varroa!  The honey flow is typically over, unless you are surrounded by star thistle, or incense cedar.

September/October management

  1. While the weather is still warm, make sure the colony has enough honey stores for winter.  The upper brood chamber should be largely full of honey, with the broodnest all in the lower brood chamber.  If not, start feeding heavy syrup.  Unless there is plenty of pollen coming in, we also will feed high-quality pollen sub (2.5 pounds every 10 days) to allow the bees to brood up heavily.  It is the bees that emerge from brood reared in October that will form the winter cluster.

Note:  if you live in the Bay Area, you may get a large eucalypt honey flow in November.  Talk to local beekeepers for advice.

December management:

  1. Varroa:  once most of the brood has emerged, apply an oxalic acid dribble or vaporization so that the colony goes into winter with a minimal mite load.

More detailed management tips

Installing the bees

Congratulations, you’ve just purchased either a quality nucleus colony (“nuc”) or a shook swarm (“package bees”) with a newly-mated queen from selected stock!

Warning: A strong nuc is full of brood and ready to grow explosively!  You may need to transfer your nuc into a larger hive within a day or so, or they may swarm.  And unless they have at least half a frame of honey stored, they may starve if not given some sugar syrup.

Some nucs (and all packages) have the queen caged. If so, remove the candy cap when you get home to allow the bees to chew through the candy and release the queen.  But do NOT remove the candy cap if the bees are tightly balled over the cage, indicating that they have not yet accepted the queen–wait another day until they are walking lightly over the cage.

Install the nuc in the center of a brood box with additional frames to fill the box.  Keep the frames of the nuc in their original order.  Be very careful not to crush the queen–a substantial percentage of queens are accidentally killed by new beekeepers during the initial transfer process.

For a package,  there are a zillion recommendations for specifics as to how to install the bees.  It makes little difference if you are installing only a single package if there are no other hives immediately nearby (if there are, install late near dusk to avoid drift of bees to the established hive). In general, lift out the feeder can to remove the queen cage, and hang the cage (use a grocery store twist tie or toothpick) from the top of a center frame.   Then shake the bees out of the cage into the hive (you can temporarily remove frames).  Use no smoke during the installation.  Then replace the hive cover (you can place the package with the hole next to the entrance to allow the rest of the bees to find their way into the hive.

Feeding your bees

Your nuc may arrive hungry–check to make sure that at least one of the outer combs contains stored honey.  If there is a good nectar flow on when your nuc is installed, there is no need to feed, but the feeding of  sugar syrup to the small colony frees the bees from the need to forage for nectar, and they can use their efforts instead to collect pollen, rear brood, produce beeswax, and draw out comb.  The production of beeswax in order to “draw out” the frames of foundation into “drawn combs” requires a great deal of sugar (whether from nectar or syrup).  Therefore, it is generally a good idea to  consistently  feed sugar syrup to the new colony until all the frames in the lower box are fully drawn.

A growing colony needing to draw foundation can utilize more sugar syrup than you can imagine (gallons)–feed it as much as it will consume until all 10 frames in the lower brood chamber are drawn out.

Here’s the art: the bees can only build comb on warmed frames, so unless the weather is quite warm, they won’t be able to draw comb outside of the cluster.  If you overfeed, the  bees will fill the broodnest full of nectar, thus preventing the queen from laying more eggs.  So what you want to do is to observe the broodnest, and feed enough syrup for the bees to be creating “white wax” at the edges of the cluster (meaning that the amount of incoming nectar and syrup, relative to the amount of free open cells, is stimulating them to activate their wax glands).  Once the sealed brood of the nuc starts emerging, the colony (cluster size) will start expanding rapidly, and you can then feed heavily to allow them to draw comb.

So at first, the colony may need perhaps a cup of syrup per day.  Later on, it may take a gallon a day.  Once all the frames in the first brood chamber are drawn, then it is up to you whether you wish to continue to feed.  Typically, in the Sierra, the main honey flow may be on by that time, and you may wish to collect some honey.  You can always return to feeding later in the season (July), if necessary, to help them to draw out all the combs in the upper brood chamber, and to put on honey stores (in Sept and Oct) for winter.

I recommend making a dedicated feeder lid—make it from a 16¼” x 20” piece of plywood, with an approx. 1½” hole in the center. Use this lid temporarily in place of your regular lid(s). Make a feeder bottle from any wide-mouthed quart jar, with about three small holes punched closely together in the center of the lid. To use the feeder, fill the jar 2/3rds full of white granulated sugar (feed no other sugars*), then add hot tap water until nearly full. Place your finger over the holes, and shake ‘til the sugar’s dissolved. Invert the jar, centered over the hole in the feeder lid. Generally, feed as much syrup as the bees will take (at least a quart per day, often more).

*Nectar contains sucrose, fructose, and glucose–all of which bees can easily digest and utilize.  Bees cannot digest some of the complex sugars or minerals in raw or brown sugar, some fruit sugars, and food waste sugars–feeding any of these may cause yeast infections in the bee hindgut and dysentery–additional info here.  Old honey may contain toxic HMF or AFB spores, so is not recommended.  Each type of sugar syrup has advantages and disadvantages as far as granulation issues, etc.  It’s generally easiest for the hobbyist to feed sucrose syrup, using plain old “white” granulated cane or beet sugar (ignore the internet chatter about purported GMO issues).

Use “light” syrup for stimulation, “heavy” syrup for winter stores.  Light syrup is 1 part sugar: 1 part water (by either weight or volume)–this is similar to the most sugar-rich natural nectars; heavy syrup is 2 parts sugar:1 part very hot water, and is quickly converted by the bees to “honey” for winter consumption.  Bees also do very well on a commercial sucrose:HFCS mix, such as Mann Lake’s Prosweet, commonly used by professional beekeepers (other manufacturers carry different sugar products at different branches, so I can’t make blanket recommendations).

C&H Baker’s Drivert (a dry flaky product from bakeries) makes for a great dry feed for stimulation–useful in nucs.  Baker’s fondant, hard “candy boards,” or even granulated sugar over newspaper can be used for winter feed (although simply leaving the bees enough natural honey is usually best, unless they have stored honeydew, which can cause dysentery).

I’ve seen no evidence of benefit from adding acid, essential oils, or purported stimulants or health supplements to the syrup.  I do add a half tsp of unscented household bleach per gallon to light syrup fed during hot weather, in order to prevent harmful microbial growth in the feeders.  The bees appear to love chlorine!

It may never be necessary to feed sugar to your colonies–I kept bees for 25 years without ever feeding syrup.  But then I learned that syrup can be of great help to the bees when there is no nectar flow, and can greatly assist colonies in “getting going” and drawing comb.

No matter what you feed, be sure to keep your honey pure by never feeding syrup in any way that it could possibly get into honey to be extracted!

Feeder jar and OSB hive hive cover

Instructions 1












An example of a simple feeder jar and temporary hive cover for feeding.  By making the hole smaller than the size of the lid, plenty of beespace is left above the top bars.  Use a wide-mouth jar for stability.

Management summary for the foothills


Hive Inspection

For best queen survival, you should not disturb the new colony for a few days (other than feeding). Inspect the colony after a week. Use little smoke and minimal disturbance. If all’s well, the bees should have started drawing out fresh comb, there should be brood of all ages, including white larvae and eggs. Note that eggs are very difficult for the beginner to see, especially against new comb. The presence of any eggs, or young larvae in royal jelly, means that you have a queen, and all’s well—you need not actually see the queen!

Q: How often “should” I inspect my colony?

A:  There are no “shoulds” in beekeeping.  You are learning about beekeeping.  You can learn some things from books, but there is nothing like the hands-on experience that you get from closely observing what is going on inside the box.  So open your hive as often as you can (every other day is OK) so long as you use only enough smoke to keep the bees from looking at you, and handle the frames carefully and gently.  Sure, such frequent opening is disruptive to the bees and may result in some degree of queen losses, but it is the only way you will ever become a good beekeeper.  It is far easier to observe the growth of a small nucleus colony than it is to tear into a hive when it is huge.  So get in there and watch your colony grow!  Learn to recognize the ages of the brood, fresh eggs, the expansion of the broodnest, pollen stores, comb building, etc.  It is not necessary to ever actually see the queen, so long as you see eggs or young brood.

Colony Buildup

The primary requirement for colonies to grow is plenty of nutritious pollen (some pollens are more nutritious than others).  Colonies grow only when pollen (and generally at least some nectar) is coming in.  For my local area in the Sierra Foothills, pollen income and colony growth are as below:

Note the typical amounts of time required for an overwintered colony to build up to swarming, and then to its maximum population.  And note how buildup follows pollen availability.

Management in a Nutshell


Reading the Combs

There is little need to ask others for advice–if you learn to read the bees and the combs, the colony will tell you its exact condition, and whatever it needs.  I’ve labeled the components below.

Beginning 1

To determine colony condition, work your way to a center brood comb, and pay most attention to the interface between the honey above, and the brood below.

Beginning 2

In this dynamic interface, you will be able to tell whether the colony is hungry or storing honey, and how good their protein reserves are.


You always want to see a nice band of beebread around the brood.  Should this band disappear, suspect that the colony is suffering from nutritional stress (more later).  There is no benefit from feeding pollen sub patties to colonies if they are already gathering plenty of natural pollen (in the Foothills, typically from February through the end of June, unless there is prolonged poor weather).

I have written a lengthy “Understanding Colony Buildup and Decline” series–all posted to ScientificBeekeeping.com.  Reading this series from beginning to end will give you a deep understanding of the biology of this fascinating creature, and allow you to make better management decisions on your own.

Initial Varroa Management

Unless I tell you otherwise, any nuc that I sell has already been treated to reduce varroa levels (we use a dribble of oxalic acid syrup during a critical window of time; see Oxalic Treatment of Nucs).  For packages, I suggest that you give any package a similar oxalic dribble treatment prior to Day 8 after installation (at which time varroa can begin to “hide” in the sealed brood).  If the nuc has not been treated, I suggest the application of either a Hopguard II strip (considered an “organic” treatment, but less effective), or an Apivar strip (synthetic, but highly effective, since our mites have not previously been exposed to amitraz).

Helping the Colony to Grow

As the population grows, and the colony can cover more frames, the bees will draw combs of foundation from the center out, and the queen will start laying in those combs.  This is your chance to watch a colony grow! (The population of bees in a nuc will expand quickly; that of a package, not until 3 weeks after installation).

Growth of your colony will be dependent upon the local nectar and pollen flows.

The colony can’t raise more bees without pollen–pollen is the main limiting factor for colony growth and well being.  Colonies also need energy-rich nectar to heat and fly, and for producing beeswax.

In general, pollen flows are adequate in most areas in spring, but if rainy weather confines the foragers, the nuc will benefit from being given a pollen sub patty or two (no benefit if there is natural pollen coming in).  And unless there is a very heavy natural nectar flow, the colony will greatly benefit from being fed all the 1:1 sugar syrup that they will consume (a half gallon a day if they will take it).  Feed syrup until you see white wax being produced–they will not draw comb unless they are producing white wax!

Making sugar syrup: use only white granulated sugar (cane or beet).  Sugars with any color may contain undigestible carbohydrates or minerals that may cause gut dysbiosis.  Feed “light syrup” for buildup (one part sugar to one part water, by weight or volume); feed “heavy syrup” for putting on winter stores in fall (2 parts sugar to 1 part boiling water).

Learn to recognize “white wax.”  It is only when bees are producing white wax that they will build comb and draw foundation.  It is a sign to the beekeeper that the bees have filled every available cell with nectar, and are crying for more room.  Thus, it is an indicator of a strong nectar flow, and a signal to add honey supers immediately.

Frequency of Inspection and arrangement of combs

You may check the colony as often as you like, but be aware that clumsy handling by beginners often results in queen loss–so handle the combs carefully.

In general, place the combs back into the same arrangement that the bees had. Always keep brood (and frames of eggs) together, honey to the outside, and pollen at the edge of the brood nest.

Exception: It’s hard for the bees to draw out the outermost combs of foundation. Once the bees draw out the inner side of the second combs in, reverse those combs, and move them to the outside (only if they contain no eggs–see illustration).

Instructions 2







Once the combs have been drawn and filled, their positions can in general be exchanged, just be sure to keep brood combs together, and in the middle of the hive.

Handling tip: always run 10 frames in your brood chambers, squeezing them back tightly together after each inspection, and then centering them in the box.

Prevent propolis from building up between the end bars–this will maintain proper bee space between the combs.  Always squeeze center the frames tightly together, and then center them in the box–you can pry them all sideways to leave 3/8″ inch clearance between the end bars of the outer combs and the sides of the box.  If you always do this, you will generally get straight combs, and will always have working room between the combs.

Feed the colony sugar syrup continuously, but not to the extent that the queen is unable to expand the brood nest due to excess stored syrup and nectar. If the bees store syrup in the center of the brood area, cut back on feeding.

Note that there is often a large colony-to-colony variation in buildup and honey production.  Unless you have other colonies to compare to, it’s difficult to know how well your colony is doing, compared to the “norm.”

Make sure you have a queen—indicated by eggs and brood of all ages. Note that it is common for beginners to inadvertently kill the queen by inexpert handling of the frames!

Queen Issues

Check to see that the queen is laying a regular pattern of brood in concentric rings by age. If brood pattern is spotty or uneven, the queen may have a problem, or the colony may be suffering from a brood disease.

Wet brood 2

Above, a colony with well-fed, healthy brood.  Note the even stepwise progression of larval ages,their high rate of survival, and the copious jelly being fed to the young larvae–all signs of a good queen in a colony in good health, enjoying good forage conditions.

It’s well known that in humans, the females improve with age.  Not so with honey bee queens.  Once a queen has mated, her supply of stored spermatozoa is finite, and typically begins to run short after two seasons of broodrearing in a large colony (she’ll last longer where seasons are short, or in a small colony).  This depletion typically occurs in the late summer of their second season.  At this point, some of the eggs that she lays in worker cells may not get fertilized, and the queen becomes a “drone layer” (photo below).  In nature, the bees typically replace their queen when this occurs via a process called supersedure.

(Above) signs of a failing queen.  Unfertilized eggs laid in worker cells (resulting in scattered drone brood), and a supersedure queen cup near the top of the photo.  Time to replace the queen!

Colonies  replace their queen by producing one or more supersedure cells, typically on a comb face.  Allow them to do so.  The mother and her daughter may coexist happily together in the hive for some time.

If there are multiple scattered eggs in a cell, or you see bullet-shaped cappings in worker brood cells, the colony may be “hopelessly queenless” with “laying workers.”  Such colonies typically exhibit a “queenless roar” when smoked, their wings are all jittery when disturbed, and the workers get pissy.  Laying worker colonies are difficult to requeen–it’s easiest to combine them with a queenright colony–just set them right on top.

Queen cells

If there are queen cells being formed, the colony may have lost their queen (you’ll see several small, scattered emergency queen cells), may be superseding the queen (one or two very large queen cells on the side of a frame; allow the process to continue), or be preparing to swarm (large queen cells often at the bottom of the frames–colony needs more room).

If you see emergency queen cells with a larva and jelly inside, you have likely lost the queen–either requeen or allow the colony 25 days to requeen itself.  Smaller “queen cups” without eggs or jelly inside or normal.


In the springtime, a crowded colony (not given enough space) will build swarm cells at the bottoms of the combs.  In the above photo, there is one queen cup, two starting swarm cells, one nearly complete cell, and one sealed swarm cell.  Queen cells are always vertically oriented– the other large horizontal cells are normal drone cells.


There are a few ways to requeen your colony.  You can allow the bees to do it themselves via supersedure, but this is risky in the foothills due to the limited supply of drones in late summer, perhaps resulting in a poorly-mated new queen going into winter.

You can rear your own daughters from your favorite queen by simply creating a few nucs in springtime, and allowing each to rear emergency queen cells.  It will take a minimum of 24 days before the new queen begins laying eggs.

You can speed up the process by purchasing or grafting queen cells–see Queens for Pennies.

Despite claims, attempts to requeen a queenright colony by placing a queen cell into it are generally unsuccessful–you need to remove the old queen first.  I generally prefer to introduce my queen cells into nucs for mating out, and then after seeing the new queen’s brood pattern, then introduce the nuc into a colony that has sat for a day after removing its queen.  Gently place the nuc into a full-sized brood chamber, remove the cover from the colony to be requeened (no queen excluder), lay a strip of newspaper at least as wide as the nuc lengthwise over the top bars (this prevents the new queen from running downhill into foreign bees), and place the cover over the top.  After a few days, you can rearrange the combs.

If instead you purchase a caged queen, if she’s been banked, she may need to be fed by the bees for a day to get her into laying condition and to pick up the colony odor for better acceptance.  A good way to ensure that your caged queen will be accepted is to do a two-step process:

  1. First, queen acceptance is best when there is a nectar flow on and no robbing–it may help to feed the colony syrup.  Also, queens are more readily accepted by young bees with brood–if your colony has been queenless for some time, it may help to add a frame of young brood with the adhering nurse bees.  And in any case, you’ll generally get best acceptance into a newly-made nuc that has sat queenless for a day or two.
  2. Press the queen in her cage, in the brood area, with the screen of the cage fully exposed to the bees, into the comb (avoid comb with honey, as you can drown the queen).  Keep the candy covered with the cork or cap, or vinyl tape.  Wait 24 hours.  After 24 hours gently open the hive with minimal smoke and inspect the behavior of the bees on the cage.  If they are walking lightly over the screen as below, and you can see them offering the queen food, and the bees can be moved with a gentle touch of your finger, they’ve accepted the queen.  You can then expose the candy, replace the cage, and allow the bees to chew through the candy to release her after you’ve put the hive back together.

In the photo above, the bees have accepted the queen.  In the photo below, they have not, and are attempting to “ball” the queen and cook her.  The bees below are behaving aggressively towards the queen, and will not move when you touch them.

In the case above, you most likely have a loose queen remaining in the hive (or perhaps she needs another day)–no sense to release the new queen, as she’ll be killed.  You need to either find the other queen, or introduce the queen into a queenless nuc.

Another method that works well is to make a “press in cage” of 1/8″ hardware cloth (washed to remove any oil).  Place the cage over some emerging brood, tip it up and carefully release the caged queen into the screen cage, and gently press the screen fairly deep into the comb.  Then open the hive after a couple of days and if all looks well, gently release the queen–watching to make sure that the bees don’t attack her.

A tip: new beekeepers often manage to allow a caged queen to fly off.  If you do so, freeze, and she will often return to the cage in a few minutes.  Prevent this from occurring by handling caged queens in a closed room, your car, or in your removed veil.

Problems and Diseases

Hive Invaders


If you live where there are bears, you’ll need to protect your hives from them.  Bears are surprisingly strong, but can be deterred by a well-constructed electric fence.  For the fence design that we use successfully in the Sierra Foothills, see Bear Fence Instructions.


Skunks may scratch at the hive entrances at night.  This can be prevented by nailing carpet tack strips across the entrance, or if the hive is on the ground, simply sprinkle a teaspoon of lye crystals onto the scratched ground, the skunks don’t like the taste, and can be easily trained to stop bothering the hive.  Racoons don’t bother hives with live bees in them.

Signs of skunk scratching.  We don’t want to harm our skunks, so instead train them with an sprinkling of lye crystals on the scratched ground.

Ant Control

Ants may be problematic in some areas. It’s common to find ants nesting between the outer and inner cover, or around the hive.  But there are only a few ant species that will actually invade a hive.  In California, Argentine ants can be a serious problem.  I have no experience with ant species found in other states.

It’s best not to spray or spread insecticides near the hive, since ants are closely related to bees, and are susceptible to the same insecticides!

You have two options:
1. Poison the ants.  For actual long-term success, you must use a bait that the ants will carry back to their colony and kill the queen.  For that purpose, borax or fipronil work best.
Since most invasive ants are seeking sugar, a sugar bait such as Terro, or homemade bait of 5% borax (sodium tetraborate) in honey or sugar syrup, offered in a Mason jar with 1/8″ screen in the lid works well.  Fipronil-based ant bait stations are also very effective at killing an ant colony, but be sure that your bees can’t gain access to the bait.
2. Protect the hive by placing it on a stand which ants are unable to traverse.


I recently noticed some pretty cool ant stands being sold by a small California company: https://defyantstands.com/

Note, combs and boxes from diseased or “deadout” hives can be reused without sterilization, except for AFB.  

Chilled Brood

An unexpected cold night in the spring can result in some chilling of the brood at the periphery of the cluster.  You may see pulled out pupae on the landing board the next morning.  You do not need to take any action.

If the brood is “spotty,” look for signs of brood disease—chalkbrood (white & tan “mummies”), EFB (twisted white & yellow larvae–often hard to diagnose), or AFB (sunken perforated cappings, melted brown larvae that “rope”).


EFB is a common bacterial disease, especially in stressed colonies in the spring.

European Foulbrood (EFB) above.  EFB used to just “go away” on its own; our current strain doesn’t.    Treat with oxytetracycline — a natural antibiotic.  Oxytet now requires a veterinary prescription, but any professional beekeeper will likely have some on hand.


Another brood disease is Chalkbrood (a fungal disease):


Chalkbrood produces distinctive, two-toned hard “mummies” in the combs.

There is no treatment for chalkbrood.  If it doesn’t spontaneously disappear, the best advice is to requeen the hive.


The most serious disease (other than varroa-induced virus collapse) is American Foulbrood (AFB)–a highly contagious bacterium that can spread to your neighbors’ hives.  Although AFB is now uncommon in professional apiaries, it is currently resurging in some urban areas that have a lot of hobby beekeepers who don’t recognize this serious problem.

AFB is nothing to mess with–ask for help if you suspect that you see it, and then scrupulously eliminate it before it spread to your neighbors!

AFB produces a distinctive, “salt and pepper” brood pattern, with some cells having sunken, perforated cappings.  It generally has a strong distinctive unpleasant odor (a cross between gym socks and dead rotting bees).

The caramel-colored melted pupae (above) are distinctive for AFB.  Stir a dry stick into the melted brood cell and then slowly withdraw it.  If the slime ropes out for 3/4″, that is diagnostic of AFB.  We burn colonies if we see even one cell!  Do not ignore AFB!!!!

Colonies that have died from AFB will have black “scales” tightly adhered to the bottom of the brood cells.  If buying or reusing combs, check them carefully for AFB scales, as this is a common way to spread the disease.

AFB combs must be burned or safely disposed of in a landfill.  The boxes can be sterilized and reused.

The Clean Up Crew

Once a colony weakens or dies, if the weather is warm, the Wax Moth will move in and lay eggs.  Its caterpillars will rapidly consume any pollen stores, boring through the combs, and building silken tubes and webbing, and chewing into the wood to pupate.  You can remove the silk (especially the white cocoons), and reuse the frames with no additional cleaning.

Wax moth is generally only a problem when temperatures are above about 70°F.  Store boxes of dark combs with light and air exposure (never wrapped up or stacked) to avoid wax moth damage.  BTW, wax worms make great pet food, and are tasty to eat, raw or cooked.

OK, most of you won’t  have any of the problems above, and your nuc or package will rapidly outgrow their first brood chamber.

Adding the Second Brood Chamber

Once the bees of your colony cover all 10 combs in the first brood chamber, it’s time to add a second brood chamber of foundation above it.   At this point of time, you should assess the varroa infestation level in your colony.  I’ll return to adding your second brood chamber after I discuss varroa management.

Varroa Mite Management

Varroa is the Leading Cause of Colony Morbidity and Mortality

The leading cause of colony failure for beginners is from not managing varroa mite levels, which then allows viruses and nosema to kill the colony.

The varroa mite transmits viruses (mainly Deformed Wing Virus) within the hive, resulting in dying brood.  This is called Parasitic Mite Syndrome (PMS).  Once a colony reaches this stage (above), it is difficult to save.

Note the two bees with deformed wings in the photo above–they are suffering from varroa-transmitted DWV.  Also note the dying brood, and bees unable to emerge.

If your colony was strong in summer, and then the bees suddenly disappear in fall, leaving behind plenty of honey above, and scattered sealed brood in the lower box, varroa is generally the culprit.  You can diagnose by holding a brood frame horizontal with the top bar away from you.  With the sun coming over your shoulder to illuminate the “ceilings” of the cells, look for the telltale white guanine deposits left by mites.  If you see them, it was most likely varroa that did your colony in.  Here are some photos of typical varroa deadouts:

1-IMG_3859In this photo I have the top bar toward me (sun to my back), looking at the “floors” of the cells for AFB scale.  To look for guanine deposits from varroa, turn the top bar away from you.

Tip: when inspecting combs, look for the shadow of your head on the ground, and then face it.  This will put the sun directly behind your back (without blinding yourself by looking directly at the sun).

dwv A colony dying from varroa/DWV.  Note the deformed wings on the bee, and the fully-formed adults in the cells unable to emerge–a typical sign.  Note the white guanine deposits left by the mites on the cell “ceilings.”

dwvAnother shot of a colony dying from varroa/DWV.  Again, note the white deposits.

Varroa guanine resizedClose up of some guanine deposits, some adult brood unable to emerge, and some cells with the cappings partially chewed open.  All typical of a varroa kill.


“Treatment Free” Beekeeping

Although my goal is to develop a stock of bees that require no treatment for varroa, I adamantly do not recommend “treatment-free” beekeeping for beginners It is biologically and ethically unjustified, inexcusable as far as practicing good animal husbandry, and spreads mites and viruses to  your neighboring beekeepers and any struggling populations of feral honey bees, and viruses to native pollinators.

Control varroa, or colonies will generally die an ugly and unnecessary death from the varroa/virus complex.  Not only that, but when that colony crashes, it floods the surrounding colonies with varroa mites, making you a nuisance to both surrounding beekeepers, and the feral population of bees that is slowly evolving resistance to the mite.  PLEASE MANAGE MITE LEVELS IN YOUR HIVES AND DO NOT ALLOW COLONIES TO COLLAPSE FROM VARROA.

Once you’ve mastered keeping colonies alive and healthy for at least three years, then you can experiment with going without mite treatments (don’t expect most commercial bee stocks to survive without treatment–you will likely have better luck with VSH, Russian, or feral survivors). There are several easy-to-use and effective “natural” mite treatments on the market that will not contaminate your combs or honey, as well as biotechnical methods such as drone brood trapping and queen caging.

Monitoring Varroa Infestation Levels

Every bee colony contains varroa mites, and more drift in from other hives.  And although we breed for resistant stock, the vast majority of our hives require mite treatments to survive.  Mite buildup follows a predictable growth curve.  My mite model demonstrates the expected mite population and alcohol wash counts for a nuc, treated before purchase:

The graph above is from Randy’s Varroa Model — a free download that runs on Excel  https://scientificbeekeeping.com/randys-varroa-model/

In the above chart, the nuc started with a reasonable 100 mites in April.  Note the progression of alcohol wash counts.  This nuc had a chance to survive the winter, but would start the next season with far too many mites to survive a second year.  Note: the alcohol wash mite counts rise substantially more slowly than the actual mite population–realize that the mite wash count will rise rapidly in late summer as the colony bee

population begins to decline.  You want to be proactive rather than reactive with mite management–intervene in early July if mite counts exceed 4 mites!

Compare to the chart below, with a somewhat

In the above chart, I started with 250 mites in April.  Note that the starting alcohol was count was still low, but the colony crashed in November.  Had the hive been in an area where there were other high-mite hives, it would have crashed even earlier, due to mite immigration from your neighbors.

Practical suggestion:

For Joe Smallscale, use my varroa model  to put together a seasonal mite management schedule of treatments for your particular operation and location.
Unless you’re a breeder, there’s little reason to wait until monitoring suggests that you’ve reached an action threshold.
Instead, use spot-monitoring of 300-bee samples (by detergent wash) to confirm that you’re maintaining adequate mite suppression in your operation.
If your counts are always zeroes, you can likely back off a bit on your treatment schedule.
If instead, counts start to exceed 6 mites, adjust your treatment schedule.
This is especially important in late summer if there is much mite drift in your area.
Expect mite counts to jump a bit when the colonies wind down brood rearing in fall (or during dearth) — confirm by monitoring that your treatment schedule takes advantage of hitting the mites when they are all out of the brood (we prefer OA dribble or extended-release).

Here in the California foothills, with 11 months of broodrearing, most colonies will require three or four 95% reductions in their mite levels during the season.

Starting in July after installing a new nuc or package, you should test it for mite level, using a sticky board or other method (I strongly recommend the “alcohol wash” or “sugar shake”). Assume that all nucs have varroa mite. You must monitor mite level, and treat if the mite level exceeds the seasonal “treatment threshold” (3 mites/half cup of bees prior to July 1, 6 mites from July 1 through late fall). We are having great success with mite-tolerant queens, biotechnical methods, and “natural” treatments.

I recommend mite testing in early spring, before supering, again in early August, and in late September (Northern Calif).

Times to monitor jpg

Due to the huge variability of stickyboard counts, any single stickyboard count is nearly meaningless.  However, they can be of use if done regularly.

The best test is an alcohol or detergent wash of a level half cup of bees (~320 bees), or the “sugar shake” (see https://scientificbeekeeping.com/sick-bees-part-11-mite-monitoring-methods/)–I recommend the alcohol wash over the sugar shake.  Learning to do an alcohol wash is so important, that I’m going to go into detail as to how to do it!

Update August 2020: We have switched from using alcohol to Dawn Ultra dishwashing liquid, diluted to 2 Tablespoons per gallon.  Allow the bees to soak in the detergent for 1 minute prior to a swirl agitation.  Due to the foam, then count the mites looking up from the bottom of the cup  — a 10X makeup magnifying mirror helps.

First, build a mite wash cup set.  For details, see these links: An Improved mite washer and Still improving.

The simplest is made from two clear 16-oz plastic cups with a snap-on lid, plus a piece of mesh fabric. Use a heated knife blade to cut roughly 1/2-3/4″ off the bottom of one cup, leaving a smooth edge:

Then cut a 12″ square of “mesh” or “Tulle” fabric–not the hole size, which must be large enough for the pinhead-sized mites to pass through.

The cut cup goes into the uncut cup, with the mesh between them:

We hate to see the bees that we sell die from neglect, and are happy to give you a prepared mite wash cup as above any time–just ask when you come by.

Fill the cup about 3/4ths full of  91% rubbing alcohol:  Update: We’ve found that Dawn Ultra dishwashing liquid, diluted to 1 Tbl per half gallon of water, works even better than alcohol.

Now you need some nurse bees to sample.  Yes, you will unfortunately need to sacrifice ~300 bees, but realize that in a typical hive, roughly 1000 bees die of old age each day.  The 300 bees are a small sacrifice in order to save the life of the entire colony!

Nurse bees are scattered throughout the hive, but mostly on frames with brood or beebread.  In order to avoid harming the queen or disturbing the broodnest, simply take your bee sample from a frame from the upper brood chamber, to the side of the broodnest:

The above frame is filled with beebread, upon which only nurse bees feed.  This is a perfect frame from which to take your sample.

Shake the bees off the frame into the tub–one frame’s worth of bees is usually plenty.

Now say the magic words: “Old bees fly off!”  The older bees will immediately respond to your command and fly home, leaving only the nurse bees, which will briefly spread into a single layer, in which it is easy to spot the queen, should you have accidentally collected her.  Although noisy, the bees flying off are not in any way inclined to sting–we do dozens of these shakes a day, and never have a bee attempt to sting us.

The young bees remaining in the tub are completely non-defensive, and if you wish, can be gently scooped up into your hand, and poured gently from hand to hand (I often do this at field demonstrations to show that young bees rarely sting, unless you squeeze them):

A mite wash does require the sacrifice of ~300 workers.  As much as any of us hate to kill a single bee, the reality is, that from midsummer on, a typical colony of bees is losing more than 1000 workers a day to natural attrition, so a 300-bee sacrifice is a small price for a colony to pay in order to be saved from varroa.  Keep in mind that any worker in the colony would unhesitatingly sacrifice itself  to benefit the colony as a whole.

Tip the tub on edge and tap the bees down into a pile, then turn the tub and use the measuring cup to scoop upward to fill it overflowing with bees.

You can then use your finger to level the bees off for an exact half cup sample.  I do this hundreds of times a season, and have never been stung in the finger:

Quickly dump the bees into the alcohol before they fly out of the cup:

It helps to immediately cover the bees floating on the alcohol with the bottom of the cup until they’ve submerged.  They all quickly and humanely die.  After the wash, dump the dead bees on the ground and the night critters will eagerly consume them.  Or you can use them to check for nosema under the microscope.

Add alcohol if necessary to have 1/4″ of alcohol above the bees, in order to allow them to tumble as you swirl the cup.  Snap the lid onto the upper cup, and swirl the cup with a small, easy circular motion (fingers pointing down) such that you can see the bees at the bottom tumbling over one another.  Mites will begin to drop immediately, and most will drop by 30 seconds.

With a good swirl, you’ll get 100% mite recovery by 45 seconds.  At that point, lift the upper cup, along with the mesh, free of the lower cup.  You can then view the lower cup from below to count the mites.  They are the size of a pin head, oval, and dark reddish-brown.  There are two mites in the photo below:

We want to see no more than 1 mite early in the spring, not more than 3 or 4, in June, and intervene with some sort of treatment if the count goes above 6 (at most 8 mites/wash in September).  Update, with detergent rather than alcohol, you must count from the bottom, due to the foam.

At less than 2 mites per 100 bees (6 in an alcohol wash of 1/2 cup of bees), virus transmission by mites is not a major issue.  At 5 per 100 (15 in a wash), some viruses begin to go epidemic.  At 15/100 (45 in a wash), colonies generally start to go into a death spiral.  There are roughly 82 mites in the photo below.  This is not at all unusual for me to see in hobby beekeeper hives in late summer.  This colony looked fine, but will collapse before midwinter.  With this many mites, it already is suffering from a raging virus epidemic, and is nearly impossible to save.

The most important times to sample are early spring, and then regularly between August 15 and the onset of winter.

Treatments for varroa control

Suggestion #1:  Be proactive rather than reactive!  It is far easier to keep the varroa level down from the start, than to later attempt to bring it down once the mites have overrun the colony.

In California, with our long broodrearing season, depending upon how resistant your bee stock is to varroa, it will generally require 2-3 90% kills of the mite per season to keep the mites under control.  I suggest that you ignore much of the information on the internet, and use the well-proven effective treatments detailed below (most are approved for organic production).  FWIW, although the essential oils sound alluring, bees as a rule do not like them, and they are stressful to the colony, as well as (other than thymol) exhibiting poor mite control.

We have very good success with Apiguard gel (thymol) or Formic Pro (formic acid). I also recommend a 3.5% oxalic acid dribble (applied accurately) before Christmas (Northern Calif).  I’ve detailed your seasonal choices for mite treatments below.

Name your poison jpg

Expected mite reductions by treatment option: Use the figures below with Randy’s Varroa Model to plan your mite management strategy.

95%: High-efficacy synthetic miticide, such as amitraz applied over several weeks. Not quick acting, so best applied proactively, early in the season.

90%: Two 50-g Apiguard treatments at 10 days, in a rim.  Best used in August, as it suppresses broodrearing.70-90% (sometimes less): 2 MAQS or Formic Pro pads, or strong formic acid treatment (time release or hard flash).  Best treatment for quick mite knockdown in warm weather.  Can be used during honey flow.

50% (approximate): 1 MAQS or Formic Pro pad, or single weak formic acid “knockback” treatment.  Quick knockback for buying time, easier on the queen.

80-90%:  Hopguard 3 if colony is broodless; would require repeated applications if brood present.  Can be used during honey flow.

25%: A single powdered sugar dusting, assuming 50% drop of phoretic mites. Requires multiple and continued applications.

15-20%: Complete removal of drone brood, if done early in the season, each removal. Provides some reduction, but labor intensive.

40-60%: The issuance of a prime spring swarm.

80-95%: Oxalic dribble or vaporization when broodless.  Excellent reduction when colony is broodless, due to natural or induced brood break.

15-45%: One Oxalic dribble or vaporization in hive containing brood, proportional to the % mites of phoretic.  Limited reduction when colonies contain brood.

85%, 3x: Extended-release OA/glycerin towels or sponges; for end result at 45 days, enter 85% for three consecutive time periods, starting at time of application.  Not yet approved.

More information on treatment options can be found at https://honeybeehealthcoalition.org/wp-content/uploads/2018/06/HBHC-Guide_Varroa_Interactive_7thEdition_June2018.pdf

Seasonally-appropriate choice of treatment options

Each treatment option has advantages and limitations, which can be taken into account when formulating an annual mite management plan.
Amitraz applied as Apivar strips can hit the mites emerging from brood, but takes 6-8 weeks to obtain full efficacy, provided that your mites don’t exhibit resistance to the product.  Thus, the best treatment window for Apivar is either in the springtime, at least 8 weeks prior to the honey flow, or immediately after pulling honey no later than mid August.  Application later in the season may be too late.
Formic acid is the treatment of choice for immediate mite reduction, and strong applications can kill the mites within the brood cells.  Formic treatment does cause about a 5-day brood break, but then the new brood looks great.  There is also the chance of queen loss (especially during hot weather), which can normally be prevented.  Formic is appropriate in springtime, when honey is on the hive, or for serious “clean up” of high-mite hives.
Thymol is disruptive to the colony, and will cause reduction in brood rearing, and is not approved for use when honey supers are on the hive.  It thus may not be appropriate in springtime or fall (when you want to encourage brood rearing).  We find it to be efficacious in August.
Oxalic acid is very efficacious applied by dribble or vapor only when a colony is without brood.  It can be used when splitting colonies in springtime to eliminate most of the mites, in early winter, or with an induced brood break.  Extended-release OA (with glycerin) is currently being registered, and can be efficacious while a colony has brood present.
The beekeeper can use Randy’s Varroa Model to figure out how many mite reductions per year are necessary in their environment, and the most appropriate treatment type to use for each reduction.

Top Bar Beekeepers

The varroa mite does not care that you’re keeping your bees in a top bar hive–colonies in top bar hives are just as susceptible to the mite.  Unless you are running a truly mite-proof bee stock, you can expect the same sort of buildup of mite populations as in Langstroth hives in late summer, and I have seen plenty of top bar deadouts with clear signs of mite overload.

Top bar hives make mite management a bit more difficult, but can be done.  For some tips, see: Mite management in top bar hives


All miticides are poisons, but some are safer than others to both the bees and to humans.  The “natural” treatments are all part of our normal diet, and most are naturally found in the hive at low concentrations.  I do not hesitate to use them, since the benefit of controlling varroa far outweighs any health concerns to the bees or their keeper.  That said, the natural treatments are all stressful to the colony, so application instructions must be carefully followed.  Proactive treatment allows you to use lower (and less stressful) doses.

The “natural” miticides

These organic acids and essential oils are approved for organic certification.  Although more difficult to use than the synthetic miticides, they leave little or no residues in the combs.  These are all that we have used in our operation since the year 2000.  That said, Apivar strips (scroll down) are very effective for those wishing the easiest mite management.


Thymol:  Natural and safe (25 g of Apiguard gel contains the same amount of thymol as does 1 lb of fresh thyme herb).  Thymol is the only consistently effective essential oil (actually a crystal at room temperature) found to date.  I suggest wearing disposable gloves (to remind you not to rub your eyes) .  We’ve used Apiguard successfully from 55°F to 95°F, applying 25 g (in a lump, not spread out) on an index card laid across the center of the top bars between the brood chambers (application without the card can result in excessive colony disturbance) https://scientificbeekeeping.com/the-learning-curve-part-3-the-natural-miticides/.   We adjust the dose according to cluster size and temperature—the proper dose will cause the removal of a handful of pupae onto the bottom board by the next morning (the colony will remove them from the hive soon afterward).  I do not recommend applying under the lid, especially in hot weather.  Repeat in a week to 10 days if mite count is not reduced adequately.  Do not apply if honey supers are on.

Above is 50g of Apiguard thymol gel being applied in a 1-1/2″ rim.  Hobbyists can purchase it in 50-gram aluminum tins.  This is a very effective late-summer treatment in the foothills, once you’ve pulled the honey.

Update 2016: recent tests of mine are showing better mite control by applying two 50-g doses of Apiguard, 10 days apart, on top of the hive (as per mfr’s instructions) in a 1.5″ wooden rim (to provide better air circulation around the thymol).  This works very well at daily high temps around 85F, and can be used up to 105F (but the colony will be somewhat stressed during treatment).  We do not taste thymol residues in the honey after treatment, but the label calls for it not to be applied with honey supers on.  We get high efficacy with two 50-gram doses applied 10 days apart.  We get great results with Apiguard in August or September.

Thymol treatment causes the bees to move the broodnest and reduce broodrearing, but after the 20-day treatment, the colony immediately recovers.

Formic acid: Natural and pretty safe, depending upon how you handle it (definitely wear nitrile gloves; the respirator is generally unnecessary).  The three main advantages of formic are that it effectively kills mites, is already a natural component of honey, and that it leaves zero residues in the hive.  The problem is that the liquid form is somewhat dangerous to handle, and getting an appropriate release of vapors is tricky.  The product Mite Away Quick Strips (MAQS) is the most user friendly https://scientificbeekeeping.com/an-early-summer-test-of-mite-away-quick-strips/, https://scientificbeekeeping.com/miticides-2011/.  Works best in doubles without supers.  A single-strip treatment gives decent mite “knock back.”  A half strip works for singles with at least 5 frames of bees.  Applied in doubles at full dose (two strips) in summer, we lose about 1 queen out of 25.  Mite kill may not be consistent, so check back.  MAQS may cause the loss of poorly-performing queens when applied at daily high temps above 85F.


Applying a single MAQS.  We use this for mite knock back while honey supers are still on.   I prefer the new Formic Pro strips over MAQS.

Tip for hobby beekeepers: to avoid queen loss, temporarily remove the queen from the hive during treatment– to a cage indoors, or to a two-frame nuc.  Then you can blast the hive with formic for an effective mite kill, and return the queen after treatment (after 24 hrs with formic flash, after 5 days with MAQS).

Oxalic dribble:  Natural and safe (the amount used is equivalent to that in a 3½-oz serving of spinach).  This product is available at any hardware store as Wood Bleach.  Follow the mixing directions at https://scientificbeekeeping.com/oxalic-acid-treatment-table/ exactly, as there is only a small margin of safety to the bees.  The oxalic syrup is very safe to handle, but care should be taken not to splash it into your eyes.  The treatment is by far most effective if the colony is broodless.  Best use is for a single application in November, or earlier if the colony has shut down broodrearing.  You can also apply in summer—3 applications, a week apart.  Excellent for “cleaning up” nucs in the spring  https://scientificbeekeeping.com/simple-early-treatment-of-nucs-against-varroa/.

Applying oxalic acid dribble, an easy way to control varroa, provided that there is very little sealed brood in the hive.

Others are using oxalic vaporization, which can also give very good results, but has operator safety issues–be sure not to breathe the vapor!

Hobby beekeepers can create an induced brood break by caging the queen for 12 days, then releasing her, and treating the hive with oxalic dribble or vapor 6-7 days later (day 18-19 after first caging).  This is a very inexpensive and effective way to control varroa.  Even better is to use queen excluder division boards to confine the queen for 14 days to a single “mite trap” frame.

A home-made queen excluder division board.  Use two, plus a full queen excluder, to confine the queen to a single frame.


  • Day 1: Confine the queen to one “varroa trap” frame, using queen excluder dividers.
  • Day 14: Release the queen.
  • Day 21: Remove the varroa trap frame and dribble the colony with oxalic acid.

See  also “How to kill three birds with one stone” below.

Update May 2017:     I’m currently testing OA/glycerin extendend release towels, which appear very promising See Oxalic Shop Towel Updates

Hopguard: this recent addition to the arsenal is completely natural, not surprisingly tasting like bitter, concentrated hops https://scientificbeekeeping.com/miticides-2011/.  You’ll want to handle it with disposable gloves due to its messiness.  Its utility and effectiveness are similar to oxalic acid, but it is more costly.  The new Hopguard II strips are effective in nucs, packages, or broodless colonies; just be sure not to directly hit the queen with the strip when you insert them.

The new Hopguard II strips hold much more active ingredient, and release it over a longer period of time.  These are handy for nucs (for which thymol and formic may be too rough).  You may need to repeat treatment.

The synthetic miticides

Amitraz: Commercial U.S. beekeepers have used the agricultural product Taktic, generally mixed with oil or shortening, for a number of years with consistent success (although this practice is illegal).  Apivar strips are an improvement, being legal, as well as delivering a reduced and safer dose over 42 days, resulting in high efficacy of kill, and fewer residues in the hive.  The strips, however, do not cause a quick kill, so may be most effective in either spring (applied at least 42 days before the honey flow), or in fall if mite levels are not too high, and there is enough time before cold weather sets in.  I gave Apivar only three stars since it does leave a residue, which recent studies suggest may affect sperm viability in the queen and have other sublethal effects on the bees, as well as the EPA’s legitimate concerns about its safety to humans.  There is also evidence that some mite populations have developed resistance to the active ingredient.

Apivar is applied at the rate of one strip per 5 frames of bees.  It is slow-release, and requires 8 weeks for full efficacy, so is best used in springtime.  This synthetic miticide is also used in tick collars for dogs.  It is effective, especially when applied in the spring (a single strip is great for nucs or packages, and exhibits few adverse effects upon the colony.

Fluvalinate and Coumaphos: These first-generation synthetic miticides (along with the off-label use of agricultural products containing the active ingredients) quickly bred for resistant mites, and contaminated the entire U.S. beeswax supply.  I cannot recommend their use.

Our typical mite management regime in Grass Valley is as below:

Update November 2022
Treatment Suggestions by Season
Each sort of mite treatment product is most suitable for different times of the year.  Below are what we’ve found to work well in the Sierra Foothills–where we have a short brood break during cold winter, early spring buildup, hot, dry summer, little pollen after mid July.
Midwinter--generally leave colonies alone
Early spring–oxalic dribble* before there is much sealed brood; formic acid, or Apivar (amitraz strips–the easiest and most effective, but must be removed prior to collecting honey).  Feed pollen sub if poor foraging weather.
Mid spring–drone brood removal, splitting with induced brood break and requeening, coupled with oxalic dribble*.  Formic Pro–half or full dose.  Likely too late for Apivar.
Late spring–apply extended-release OA/glycerin treatment on cellulose towel (if legal in your country).  Formic Pro–half or full dose.
Late June–check mite levels while honey supers are still on; treat with formic acid if indicated Formic Pro–half or full dose.
Mid August (there is no advantage to us for broodrearing at this time)–50 g Apiguard thymol gel, 10 days to 2 weeks apart, in a 1.5-inch rim above the brood nest (or two 25-g applications between the brood chambers).  Hard formic blast to hives with excessively high mite counts.  Apivar strips (this is the latest application date for adequate mite control before autumn).
Early September  through October–Mite control should have been completed by now; if not, use Formic Pro for a quick treatment.  Feed pollen sub (and syrup if necessary) to stimulate the rearing of healthy brood that will form the winter cluster.  Due to possible mite immigration from other hives, monitor mite levels, and treat with OA* or Formic Pro–half or full dose– if necessary.
Late November/December (as the last sealed brood emerges)–dribble with OA*.  OA vaporization also an option.
*We prefer the oxalic dribble in 40% glycerin (Google my “Oxalic Acid Treatment Table”), but OA vaporization will give similar results, with slow-release vaporizers possibly being more effective.
I’m also very impressed by extended-release oxalic acid in glycerin–not the Argentine formula, but the formula at the end of this article.  However, this treatment must be proactive–before mite levels are high, since it takes 50 days for full efficacy.  This treatment is not yet legal in the U.S., so I cannot yet recommend it.
Fomic acid details
In late summer, when colonies are full of brood, and mite levels get high, we use formic acid.  I’m experimenting with different application methods, trying to find ones that are safe for the applicator, and that don’t cause queen loss in hot weather.
The beauty of formic acid is that it penetrates the cappings if applied at a high enough concentration, leaves no residues in the hive or honey, and gives a colony a new lease on life (the following brood patterns are typically beautiful).
Here’s what we’ve found to work for our double-deep Langstroth hives (may be different if your beekeepers have different hive configurations):
  • A single MiteAway Quick Strip (MAQS) between the brood chambers.  About 50% mite reduction, but no queen loss.
  • Two MAQS between the brood chambers, but with the upper chamber shifted front or back to leave a 2 cm space for ventilation.  There may be some loss of already-failing queens.
  • Top formic flash, 65% formic applied by a fume board.  30 mL will give a mite knock back, 90 mL will give near complete mite kill, but will also kill some queens in hot weather.  The beekeeper can always remove the queen to a cage or a nuc overnight while doing the flash.
  • The Nassenheider formic applicator also works, but is more complicated.
  • For really high-mite hives, we split down to single boxes, and apply 300 mL of 65% formic absorbed into some cellulose, placed in a plastic bag with around 50 paper-punch holes.  This will kill all the mites in the box, but not kill the sealed brood or adult bees (expect to see about 50-100 dead adults the next day).  It will kill a large percentage of queens if they are not removed.  The treatment takes about a week, but if you add a new queen back, the colony will quickly rebound like new.
  • For nucs, you must limit the release rate of the formic.  We use one-half of a MAQS, set on the top bars, with the top of the strip tightly covered by either the hive cover or plastic.  This limits formic release greatly–it takes well over a week for the strip to go dry.
For further information, I suggest the following articles:

Varroa Strategy

Mite Treatments 1

Mite Treatments 2

Formic acid strips

Oxalic Acid



Back to the hive: adding another brood chamber

Once the bees have drawn out all the combs in the first brood box, you can add the second brood box (you may wish to add a drone frame for mite trapping).

Do not mix drawn combs with the foundation; just add 10 frames of foundation-this will produce the straightest combs.

We have our best luck at drawing foundation by adding full boxes of 10 frames directly over the brood of strong (at least 10 frames covered with bees) growing colonies during a strong nectar flow.

Keep feeding the colony until all the combs are drawn out. At this point, the brood chamber is complete (assuming a double deep brood chamber), and you should discontinue feeding.

Drone brood

A healthy colony will often create drone comb between the two brood chambers in spring.  Always check such exposed brood immediately for the presence of varroa, as it is a decent indicator of brewing problems.

If the colony fails to move up onto foundation in an added box, it is generally due to a lack of nectar flow.  In that case, keep feeding sugar syrup.  Bees will not draw foundation unless they are “whitening wax” due to intense feeding or an intense nectar flow.  It takes a minimum of 2 gallons of heavy syrup to draw the wax on 10 deep combs, and another 5 gallons to fill them with sugar “honey” for winter stores.

Adding Honey Supers

Once the colony has filled two brood chambers (this may not occur in your first year), you can then add a queen excluder (I highly recommend) and honey supers.

Don’t bother adding foundation unless you see white wax.  But always add more combs if you do!

Queen Excluders

Bees do not like to draw foundation placed above an excluder (not a problem if you are adding drawn comb, which you will unfortunately not have available your first season).  To encourage bees to work through the excluder, I suggest “reversing” the brood chambers if there is a band of honey across the top of the upper combs.  This maneuver will place brood directly below the excluder, which encourages the bees to work upward.

Keep in mind that bees will not draw foundation unless they are producing white wax.  This rule applies even more emphatically if you are trying to get them to work through an excluder onto foundation.

There is a major advantage of keeping your honey supers free of brood cocoons–wax moth cannot grow on stored “white” combs free of brood cocoons or beebread (not enough protein).  By using queen excluders, you can keep your honey combs free of brood cocoons, and thus eliminate the storage problem from wax moth.

Getting a Taste of Honey

OK, you may not get a full honey crop your first season, but you can at least steal a little from the bees so long as you replace it by feeding them heavy (2:1 sugar:water) syrup before cool weather sets in.

Let’s say that the first brood box is full, and now the honeyflow is starting, and you’d really like to get a little honey the first year. Just put on the second brood box, and stop feeding syrup. Let the bees work up and fill the box with brood and honey. Once the honeyflow’s over (usually once blackberry stops blooming at the end of June), you can pull out frames of honey and do a “scrape extraction.” Use a tablespoon to scrape the honey off the foundation into a nylon stocking hung in a gallon jar, then return the scraped frame to the hive, and resume feeding until the bees draw it out again. They will winter just fine on honey made from sugar syrup.

Supering your Hive for Honey Production

I love queen excluders–they allow you to keep the queen out of your honey supers.  The world’s largest crops of honey (in Australia) are all produced through queen excluders.

One of the most common complaints is the “my bees wouldn’t go through the queen excluder to draw foundation.”  Bees won’t do so until every single cell of drawn comb below the excluder is full of nectar–only then will they work foundation, and as I mentioned above, they won’t draw foundation unless there is a very heavy nectar flow on.  Bees also are adverse to crossing a solid “honey band” below the excluder.  A Tip: you can encourage them to move through the excluder by rearranging your brood boxes or frames so that there are frames of brood right up to the queen excluder.

Late-Summer Management and Varroa Control

Your colony will generally reach its maximum size around July 1, and get somewhat smaller during the late summer and fall.  In the foothills, there is typically a pollen dearth from early July through October, and the colony will minimize its broodrearing.  This is good, since it reduces varroa reproduction.  Use this window of opportunity to control varroa in August (Apiguard thymol gel works very well).

After you’ve got varroa under control, you may then wish to provide the hive with high-quality pollen sub as below:

Winter Preparation

Colonies winter best (in the foothills) in two deep brood chambers or equivalent, with a total weight (mainly due to honey) of about 130 lbs (you need at least two fingers to tip the hive).  If the hive is not heavy by the end of September, feed heavy sugar syrup until it is.

If your apiary is located in a dry area of the foothills, there may not be enough pollen to sustain late summer broodrearing–colonies in these areas greatly benefit from late summer feeding with pollen supplement.  Any of the top-tier pollen supplements work–if you don’t see pollen beebread in an arc above the brood, the colony is likely hurting for protein.  We typically feed each colony several pounds of pollen supplement during August through October.  This may not be necessary if you live in town or in an irrigated area.

The best indicator of protein status is how much jelly the nurse bees are feeding to the young larvae.  Larvae fed generously with jelly are called “wet brood.”

Wet brood

When a colony suffers from protein deficiency, the nurses will cut back on the amount of jelly that they feed to larvae.  See the photo below for “dry” brood.

Dry broodThere are eggs in the center cells; larvae being given minimal jelly in the cells below. When we see such “dry” larvae, we immediately feed patties of pollen substitute (see Comparative Test of Pollen Subs).

There is a trade off regarding the fall feeding of your hives.  Colonies that are strong and well fed in fall winter well, but will then also be strong in spring.  They will then want to swarm.  Escaped swarms later become “mite bombs” that will come back to haunt you.  So if you build your colonies up by feeding, please then manage them to prevent swarming the next spring–this will help the beekeeping community overall.

Rust fungus spores

Be aware that in the Sierra foothills, in late summer the bees may be tricked by a fungus into gathering their spores instead of nutritious pollen.  The blackberry rust fungus produces sweetened fluorescent-orange spores that the protein-desperate bees will gather and store as beebread–below:

This bright orange beebread consists nearly entirely of rust fungus spores.  Colonies quickly go downhill on this diet–note the spotty brood pattern.  Don’t let this beebread fool you!  If we see this occurring, we give the hives two rounds of 2-3 lbs of high quality pollen sub:

If you live in town, there will likely be enough pollen to keep your colonies healthy during late summer.  On the contrary, in dry rural areas, colonies can go downhill due to lack of pollen (and especially if they are gathering rust fungus spores).  Feeding pollen sub (above) can rejuvenate those colonies.  But be aware that its a trade off–increasing broodrearing also increases varroa reproduction.

It takes a fair amount of pollen sub to provide enough protein–about one 1-lb patty per week (you can feed several pounds at one time if you don’t have Small Hive Beetle in your area).

Winter Prep

Winter prep consists of having the hives off the ground and in a well-drained sunny location.  It helps to reduce the entrance.  A well-prepared colony (well fed, and low mite level) should need no care during the winter, and will begin to rebuild its population in January.  An insulated cover (such as with 1″ of Styrofoam) will help the colony.

Next Spring and Splitting

Most strong colonies will attempt to reproduce in spring by swarming.

If you lift the upper box of the broodnest of a colony preparing to swarm, you’ll typically see swarm cells hanging from the bottom bars as shown above (but there may well be swarm cells elsewhere in the hive).  The old queen and a swarm may leave any time once the first cells are sealed.

There are management techniques than can be used to minimize the cues that initiate the swarm impulse (see Minimizing Swarming ).  One of the most effective techniques is to simply split the colony.  You can split a strong colony in half, or make up to 5 nucleus hives from it.  However, keep in mind that there may be a tradeoff between later honey production and “making increase.”  Ideally, you’d remove only enough bees to avert swarming, but leave enough for the colony to recover its maximum population just in time for the start of the main honeyflow in your area.

There is also the issue of how to provide queens to the splits–some methods result in a very long break during which the colony will have no emerging adult bees–see the table below:

In general, the more brood that you can put into a split, the better (the amount of brood is more important than the amount of adult workers).  Typically, make your splits with at least 5 frames of bees, a ripe queen cell, and a minimum of 2 full frames of brood.  But such a split may not make a honey crop in the first year.  The same split made with 4 full frames of brood and a laying queen, on the other hand, can well grow quickly and make a honey crop, if immediately given plenty of drawn comb, and fed some sugar syrup.

How to kill three birds with one stone

You can kill three birds with one stone each spring–preventing swarming, requeening, and mite control.  See the graphic below:

By splitting your colony when it is thinking of swarming (by using either a natural swarm cell or a purchased one), you can use oxalic acid dribbles (at different times) to nearly eliminate varroa from the two splits (by creating induced brood breaks).  The small-scale beekeeper can easily manage varroa by using the above or similar creative methods of creating brood breaks.


Read all about beekeeping, but remember that there is no substitute for hands-on experience in the beeyard with an seasoned beekeeper. Find a mentor in your area.  The easiest test for choosing a mentor is to find someone who consistently has extra bees for sale each spring (not necessarily the one who is most strongly opinionated).

Getting a colony of bees is not like getting a puppy–you expect the puppy to live to old age; this may not be the case with bees. In nature, a large percentage of colonies die each year. Even the best beekeepers may have a third of their colonies die in some years. It helps to keep more than one colony, so that you can split it in spring to make up for losses.

Good luck with your new colony—I hope you have great success this year! If you have suggestions as to how I can improve these instructions, please let me know!



Additional resources:

For a good, standard, no nonsense summary of good beekeeping practices, see